Publications

Precision Glass Moulding and beyond

Publications

YearTitle/AuthorDocument
Type
2010Design recommendations for precision glass moulding
Nollau, Sebastian; Wellensiek, Markus; Hollstegge, Daniel		 
2010Cost-efficient optics design
Nollau, Sebastian; Mäkinen, Jukka-Tapani
2010Umfrage unter Optikherstellern zeigt hohes Potenzial für Präzisionsblankpressen
Nollau, S.
2010Chapter 8: Cost model of injection molded optics
Jukka-Tapani Mäkinen		 
2009Precision replication technology for optical glass products
Tibor Szalay		 
2009Cost Modeling of Injection Molded Optics
Jukka-Tapani Mäkinen		 
2009Design-Regeln für das Präzisionsblankpressen von hochpräzisen Optiken
Nollau, S.
2009Design rules for accurate blank molding of high-precison optics
Nollau, S.
2009Projektvorstellung Production4µ
Nollau, S.
2009The Production4µ project
Nollau, S.
2009Control of Advanced Tool Alignment System in an Ultra Precision Lathe
Panarese, D., Niehaus, F., Brecher. C, Surica, M., Meo, F.		 
2009Microscale Mass Production - European researchers develop automated system for mass producing optical
Brecher, C.; Weinzierl, M.; Niehaus, F.; Schmitt, R.; Köllmann, D.		 
2009Subsurface Damage Analysis of Ultra-precise Ground Tungsten Carbide
Klocke, Dambon, Hünten, Bresseler		 
2009Ultrasonic Assisted Diamond Turning of Hardened Steel for Optical Mould Manufacturing
Klocke, Dambon, Bulla, Heselhaus		 
2009Critical Parameters in Ultrasonic Assisted Diamond Turning of Hardened Steel Alloys
Klocke, Dambon, Bulla, Heselhaus		 
2009Numerical Simulation Assisted Curve Compensation in Compression Molding of High Precision Aspherical
Wang, Yang Chen, Klocke, Pongs, Yi		 
2009Segmentation and selective alignment of measurement data for optical surfaces
Schmitt, R.; Brecher, C.; Köllmann, D.; Buß, C.; Manhães, M.		 
2009Machining of Micro-Features on Hard Metals by μEDM
Qian, J., Reynaerts, D.		 
2009An adhesive based chuck for precision machining
Balabanava, N., Sempels, S., Qian, J., Reynaerts, D,		 
2009Isara 400: development of an ultra-precision CMM for 3D measurement of large parts
Rilpho Donker		 
2009REALIZATION OF ISARA 400: A LARGE MEASUREMENT VOLUME ULTRA-PRECISION CMM
Rilpho Donker, Ivo Widdershoven and Henny Spaan		 
2009Economic Aspects of Molded Optics
Rien de Schipper, JT Mäkinen		 
2009Mass manufacturing of Injection molded optics
Rien de Schipper		 
2009Fast axis collimation for high power diode lasers
D. Kura, H. Moser, E. Langenbach, M. Forrer		 
2009Removing spatial mid-frequencies by using sub-Millimeters FJP footprints
Karin Hauser, Safer Mourad, Mark Meeder, Oliver Fähnle		 
2009Influence of computing power spectral density (PSD) on representation and removal of spatial mid-frequencies
Safer Mourad, Karin Hauser, Mark Meeder, Oliver Fähnle		 
2009Molded glass aspheres boost optical-design choices
Kunz A.		 
2009Control of Advanced Tool Alignment System in an Ultra Precision Lathe
Panarese, D., Niehaus, F., Brecher. C, Surica, M., Meo, F.		 
2009Tool manufacturing for precision glass molding
Bresseler, B.		 
2009European Process Chain for High Precision Glass Moulding of Advanced Optics
Pongs, G.		 
2009Precision Glass Moulding of Optics with High Complexity
Bresseler, B.		 
2009Pressen von Präzisionsoptiken - Der Schlüssel liegt im Werkzeugbau
Bresseler, B.; Pongs, G.		 
2009Cemented carbides for Precision Moulding Form Applicationd
Michael Dröschel		 
2008Control of Advanced Alignment Systems in High Precision Micro-machining of complex shapes
Panarese, Surico, M., Meo, F., M. Weinzierl		 
2008"Asphärische Freiheiten" aus Glas
Kunz A.		 
2008New concept for direct alignment of workpiece in precision machining
Qian, J., Sempels, S., Balabanava, N., Reynaerts, D,		 
2008Messung komplexer Freiformoptiken
Köllmann, D.		 
2008Deflektometrische 3D-Optikprüfung
Köllmann, D.		 
2008Direct Diamond Turning of Steel Molds for Optical Replication
Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus M.		 
2008ULTRASONIC ASSISTED TURNING OF HARDENED STEEL WITH MONO-CRYSTALLINE DIAMOND
Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus M.		 
2008Sub-micron palletizing system for micro- and ultraprecision machining
Brecher, C.; Weinzierl, M.; Rashid, A.		 
2008Sub-Micron Referencing System for Ultra Precision Machining Processes
Brecher, C.; Weinzierl, M.; Schmitt, R.; Köllmann, D.; Rashid, A.		 
2008Control of Advanced Alignment Systems in High Precision Micro-machining of complex shapes
Panarese, Surico, M., Meo, F., M. Weinzierl		 
2007Präzision bereits in der Planung - Featurebasiertes Kostenmanagement in frühen Phasen der Produktgestaltung
Wellensiek, M.
2007Herausforderungen der Prozesskettenplanung und Kostenvorhersage in der Mikroproduktion
Nollau, S.
2007Ultrapräzision - eine Frage der Einstellung, Automatische Werkzeugausrichtung für die Diamantzerspanung
Brecher. C, Niehaus, F.
2007New approaches for an automised production in ultraprecision machining
Brecher, C.; Weinzierl, M.
2007Messtechnik für die Optikproduktion - Optikfertigung beherrschen durch erweiterte Merkmalsdetektion
Köllmann, D.
2007Deflektometrische 3D-Optikprüfung
Köllmann, D.
2007Spark erosion of hard metals for precision glass moulding
Qian, J., Verlinden, M., Peirs, J., Reynaerts, D.
2007On Micro-EDMing of hard metals
Qian, J., Verlinden, M., Peirs, J., Reynaerts, D.
2007How can plastics injection molding help driving down the cost of photovoltaic concentrators?
JT. Mäkinen; R.de Schipper 
2007Moore’s law and mold making: staying in the megapixel race
Kor Renkema, Bob van Katwijk
2007How can plastics injection molding help driving down the cost of photovoltaic concentrators?
Jukka-Tapani Mäkinen
2007Development of glass lens moulding tools
Tibor Szalay
2007Precision glass lens moulding – research and development in Production4m project (in Hungarian)
Tibor Szalay
2007Mapping of Hungarian R&D in the field of nano-and micromanufacturing technology, in respect of the European IPMMAN and MINAM activites within the EU 6th and 7th Framework Programs
Haidegger, G., Szalay, T., Biro, Zs., Kovacs, Gy.		 
2007Evaluation and Integration of Possible Sensor Techniques
Brinkmann, M.		 
2007 Precision Glass Moulding of Advanced Optics – Challenges for Mould Making
Bresseler, B.		 
2007Ultrapräzise Formwerkzeuge für das Präzisionsblankpressen optischer Gläser - Der Werkzeubau als Maß
Bresseler, B.		 
2007Direct pressing of optical lenses
Rudolf Stricker, Rebecca Zamath