| Author |
Title |
Date |
Published in |
| Balabanava, N., Sempels, S., Qian, J., Reynaerts, D. |
An adhesive based chuck for precision machining |
2009 |
Proceedings of the 9th international conference of the european society for precision engineering and nanotechnology, 2, |
Brecher, C.;
Weinzierl, M. |
New approaches for an automised production in ultraprecision machining |
2007 |
Proceedings of the 3rd International Conference on Multi-Material Micro Manufacture, ISBN 978-1904445-53-1, S. 343-346 |
Brecher, C.;
Weinzierl, M.;
Niehaus, F.; Schmitt, R.; Köllmann, D. |
Microscale Mass Production - European researchers develop automated system for mass producing optical devices |
2009 |
Micro Manufacturing 2 (2009), 1, S. 44 - 47 |
Brecher, C.;
Weinzierl, M.;
Rashid, A.
|
Sub-micron palletizing system for micro- and ultraprecision machining |
2008 |
Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, ISBN 978-0-9553082-5-3, S. 410-414 |
Brecher, C.;
Weinzierl, M.;
Schmitt, R.;
Köllmann, D.;
Rashid, A. |
Sub-Micron Referencing System for Ultra Precision Machining Processes |
2008 |
Proceedings of the 4th International Conference on Multi-Material Micro Manufacture, ISBN 978-1-904445-76-0,
S. 313-316 |
| Brecher, C., Niehaus, F. |
Ultrapräzision - eine Frage der Einstellung, Automatische Werkzeugausrichtung für die Diamantzerspanung |
2007 |
Mikroproduktion 04/2007, ISSN 1614-4538 |
| Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus, M. |
Ultrasonic Assisted Diamond Turning of Hardened Steel for Optical Mould Manufacturing |
2009 |
Proceedings of the EOS Conferences at the World of Photonics Congress 2009 |
| Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus, M. |
Critical Parameters in Ultrasonic Assisted Diamond Turning of Hardened Steel Alloys |
2009 |
Proceedings of the 9th international conference of the european society for precision engineering and nanotechnology, 2 |
Klocke, F.; Dambon, O.; Hünten, M.;
Bresseler, B.
|
Subsurface Damage Analysis of Ultra-precise Ground Tungsten Carbide |
2009 |
Proceedings of the 9th international conference of the european society for precision engineering and nanotechnology, 2 |
| Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus M. |
Ultrasonic Assisted Turning of Hardened Steel with Mono-crystalline Diamond |
2008 |
Proceedings of the 23rd ASPE Annual Meeting |
| Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus M. |
Direct Diamond Turning of Steel Molds for Optical Replication |
2008 |
Proc. of the SPIE Vol. 7283, AOMATT 2008, |
| Köllmann, D. |
Deflektometrische 3D-Optikprüfung |
2008 |
Excellence in Production - Fertigungsmesstechnik und Qualitätsmanagement |
| Köllmann, D. |
Deflektometrische 3D-Optikprüfung |
2007 |
IPT Jahresbericht 2007 |
| Köllmann, D. |
Messung komplexer Freiformoptiken |
2008 |
IPT Jahresbericht 2008 |
| Köllmann, D.; Vielhaber, K. |
Messtechnik für die Optikproduktion - Optikfertigung beherrschen durch erweiterte Merkmalsdetektion |
2007 |
Tools |
| Nollau, Sebastian |
Herausforderungen der Prozesskettenplanung und Kostenvorhersage in der Mikroproduktion |
2007 |
ZWF |
| Nollau, Sebastian |
Design-Regeln für das Präzisionsblankpressen von hochpräzisen Optiken |
2009 |
Laser & Photonik |
| Nollau, Sebastian |
Design rules for the ultra-precise glass moulding |
2009 |
Laser & Photonics |
| Nollau, Sebastian |
Projektvorstellung Production4µ |
2009 |
Laser & Photonik |
| Nollau, Sebastian |
The Production4µ project |
2009 |
Laser & Photonics |
| Nollau, Sebastian |
Projektvorstellung Production4µ |
2006 |
IPT Jahrbuch |
Panarese, D., Niehaus, F., Brecher. C, Surica, M.,
Meo, F. |
Control of Advanced Tool Alignment System in an Ultra Precision Lathe |
2009 |
2nd International Researchers Symposium 2009 on INNOVATIVE PRODUCTION MACHINES AND SYSTEMS |
Panarese, D.; Surico, M.,
Meo, F., Weinzierl, M. |
Control of Advanced Alignment Systems in High Precision Micro-machining of complex shapes |
2008 |
6th CIRP ICME ’08 International Conference on Intelligent Computation in Manufacturing Engineering, ISBN 978-88-900948-7-3, S. 647-652 |
| Qian, J., Reynaerts, D. |
Machining of Micro-Features on Hard Metals by μEDM |
2009 |
Proceedings of the 9th international conference of the european society for precision engineering and nanotechnology, 2 |
| Qian, J., Sempels, S., Balabanava, N., Reynaerts, D. |
New concept for direct alignment of workpiece in precision machining |
2008 |
10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, 1 |
| Qian, J., Verlinden, M., Peirs, J., Reynaerts, D. |
Spark erosion of hard metals for precision glass moulding |
2007 |
Proceedings of the 4th International conference on Leading Edge Manufacturing in 21st Century |
| Qian, J., Verlinden, M., Peirs, J., Reynaerts, D. |
On Micro-EDMing of hard metals |
2007 |
Proceedings of the Micromechanics Europe 2007 - 18th Workshop on Micromachining, Micromechanics and Microsystems |
| Schmitt, R.; Brecher, C.; Köllmann, D.; Buß, C.; Manhães, M. |
Segmentation and selective alignment of measurement data for optical surfaces |
2009 |
Proceedings of the EOS Conferences at the World of Photonics Congress 2009 |
| Wang, Yang Chen, Klocke, Pongs, Yi |
Numerical Simulation Assisted Curve Compensation in Compression Molding of High Precision Aspherical Glass Lenses |
|
Journal of Manufacturing Science and Engineering |
| Wellensiek, M. |
Präzision bereits in der Planung - Featurebasiertes Kostenmanagement in frühen Phasen der Produktgestaltung |
2007 |
Tools |
